For Research Use Only.
Not for use in diagnostic procedures.
30251 Rev F, Saphyr Networking and Setup Guide
Page 27 of 36
2.2.5. Navigate to etc folder.
cd /etc
2.2.6. Edit Hosts file and modify all IPs to their assigned addresses. Enter the command:
sudo nano /etc/hosts
2.2.7. Input all Nodes and BAS
Static IPs
provided by customer IT Dept .
2.2.8. Exit and save with the following command. Enter “Y”.
ctrl x
2.2.9. Enter the following command.
cd /etc/sysconfig/network-scripts
2.2.10. Enter “
ls –l
” to locate the ifcfg-p4p1 file.
2.2.11. Add the Saphyr static IP, Netmask, Gateway, and DNS addresses. Enter the command below
then modify the IP as needed.
sudo nano ifcfg-p4p1
