For Research Use Only.
Not for use in diagnostic procedures.
30251 Rev F, Saphyr Networking and Setup Guide
Page 10 of 36
Bionano Access Server
The Bionano Access Server (BAS) requires 1 customer provided static IP address and will come with two pre-
configured static IP addresses (111.111.111.1, 222.222.222.2) for connection to Instrument Controller(s).
Bionano Support personnel will configure the network for all Bionano systems during installation.
The Bionano Access Server is designed to be located adjacent to the Saphyr Instrument Controller. The two
systems are tethered for direct data transfer.
Bionano Access Server Specifications
Note: The Bionano Access Server is supplied with the Saphyr system.
Type
Requirements/Specifications
Provided By
Bionano
Software
•
CentOS 7.x
•
Bionano Access
•
Bionano Tools
•
PostgresSQL
•
Nodejs
•
Perl
•
Python
•
R
•
Docker
Memory
128 GB RAM
Data Storage
40 TB with RAID Controller
Space
•
Height: 46 cm (18 in)
•
Width: 18 cm (7 in)
•
Depth: 47 cm (18.5 in)
Power
•
100-240 VAC at 50-60 Hertz
•
Power Consumption ≤ 300 Watts
•
The server is shipped with a United States power cord. Users outside of the United
States are required to supply a 2m long, country specific IEC 60320-C13 power cord
(in some cases, the FSE may be able to provide the suitable power cord).
Network
•
One port is connected to the Saphyr Instrument controller at 10 GB.
•
LAN connection can be done at 1 GB
Bionano Access Proxy Server Compatibility
Bionano Access is not compatible with proxy servers and should be excluded on all user workstations from proxy
requirements. Proxy servers will often cache results and prevent dynamic pages such as the dashboard from
updating properly.
