PLEASE READ AND SAVE THESE
INSTRUCTIONS
DESCRIPTIONS (SEE FIG. 1-8):
BT3813M Control Panel-
A. Speed Control Buttons
B. Timer Control Knob
C. Oscillation Control Button
BT3813E Control Panel-
D. Speed Indicator Lights
E. Power/Speed Button
F. Breeze/Sleep Mode Buttons
G. Breeze /Sleep Mode Indicator Lights
H. Oscillation Indicator Light
I. Oscillation Control Button
J. Timer Indicator Lights
K. Timer Control Button
Remote Control (Model BT3813E only)
L. Power/Speed Button
M. Breeze/Sleep Mode Button
N. Timer Control Button
O. Oscillation Control Button
Base/Cord Assembly (for both BT3813M/
BT3813E)
P. Fan housing
Q. Rear base
R. Front base
S. Screws (4)
T. Power cord
U. Crosshead screws (2)
V. Cord clamp
IMPORTANT INSTRUCTIONS
When using electrical appliances, basic safety
precautions should always be followed to reduce
the risk of fire, electric shock, and injury to
persons. These precautions include:
• Read all instructions before using this
appliance.
• Use the fan only for purposes described in
the instruction manual.
• To protect against electrical shock do not
immerse unit, plug or cord in water or spray
with liquids. Plug the appliance directly into
electrical outlet.
• Unplug from outlet when not in use, when
moving fan from one location to another,
before putting on or taking off parts and
before cleaning.
• Avoid contact with moving parts.
• Do not operate in the presence of explosive
and/or flammable fumes.
• To avoid fire hazard, NEVER place the cord
under rugs or any parts near an open flame,
cooking or other heating appliance.
• Do not operate any appliance with a
damaged cord or plug after the appliance
malfunctions, or has been dropped/damaged
in any manner. Take it to an Authorized
Service Center for its examination and/or
repair.
• The use of attachments not recommended
or sold by the appliance manufacturer may
cause hazards.
• Do not use outdoors. Do not let the cord
hang over the edge of a table, counter or
come in contact with hot surfaces or leave
exposed to high traffic areas.
• To disconnect, grip plug and pull from wall
outlet. Never yank on cord.
• Always use on a dry, level surface.
• Do not operate fan until fully assembled with
all parts properly in place.
• This product is intended for household use
ONLY and not for commercial or industrial
applications.
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance.
• Close supervision is necessary when any
appliance is used by or near children, or
incapacitated individuals.
ASSEMBLY INSTRUCTIONS
(SEE FIG. 7 & 8)
1. Assemble Base (Q,R) to Fan Housing (P)
making sure the cord is enclosed between
base (Q,R). Secure together with 4 Screws
(S). Refer to Fig.7 for proper alignment of
assembled Base to Fan Housing.
2. Secure Power Cord (T) to bottom of Base
(Q,R) using the Cord Clamp (V) with 2
crosshead screws (U). Refer to Fig.8.
1
ENGLISH
Fig. 7
Fig. 8
P
Screw
Q
R
S
T
U
V
BT3813M_BT3813E-LA_13MLM2.indd 5-6
9/4/13 4:20 PM
