BT16RBS-IN
Fig. 1
Fig. 3
Fig. 4
PLEASE READ AND SAVE THESE
IMPORTANT INSTRUCTIONS
1. Read all instructions before using this
appliance.
2. To avoid fire or shock hazard, plug the
appliance directly into an appropriate
electrical outlet.
3. Keep the power cord out of heavy traffic
areas. To avoid fire hazard,
NEVER
put
the power cord under rugs, near heat
registers, radiators, stoves, or heaters.
4. To protect against electrical hazards,
DO
NOT
immerse the appliance in water or
other liquids. Do not use near water.
5.
NEVER
drop or insert any objects into
the openings of the unit.
6. Do not operate any appliance with a
damaged power cord or plug. If the motor
fails to operate or the unit has been
dropped or damaged in any manner,
return appliance to manufacturer for
examination and/or repair.
7.
DO NOT
use outdoors.
8.
NEVER
place on a soft surface such as
a bed or sofa as this could cause the unit
to tip over and block the air inlet or outlet
grills.
9.
DO NOT
place anything on top of unit.
10.
WARNING:
To reduce the risk of fire or
electric shock,
DO NOT
use this
appliance with any solid-state speed
control device.
11.
CAUTION:
In order to avoid a hazard
due to inadvertent resetting of the
thermal cutout, this appliance must not
be supplied through an external
switching device, such as a timer, or
connected to a circuit that is regularly
switched on and off by the utility.
12. This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
lack of experience and knowledge,
unless they have been given supervision
or instruction concerning use of the
appliance by a person responsible for
their safety. Children should be
supervised to ensure that they do not
play with the appliance.
13. This product is not desgned or intended
to be used with an extension cord.
ASSEMBLY INSTRUCTIONS
1. Assemble Base Halves (E) around the
cord. Refer to FIGURE 5.
2. Secure assembled base to the Fan
Housing with two thumb screws (F).
Refer to FIGURE 5
3. Secure Power Cord (G) as shown in
FIGURE 6
4. Secure the Wiring Clip Slot (H) with the
remaining two Philips head screws.
Refer to FIGURE 6
OPERATING INSTRUCTIONS
(See Fig. 2, 3, 4)
Remote Control: Remote Control requires
2 AAA batteries for operation. There is a
slot on the back of the unit (Refer to Fig.
2) to store the remote when not using.
A. Power/Speed Settings
Press
= On, I,
II, III, Off
B. Timer Control
Press
= Turns Off in 1, 2, 4, 8 hours
C. Oscillation Control
Press
= Oscillation On, Off
D. Natural Breeze, Sleep Breeze Modes
Press
= Natural
Breeze, Sleep Breeze
Natural Breeze Mode
will randomly
cycle through the fan speed settings
from High, Medium, Low & OFF to
simulate a natural breeze until the user
turns the unit OFF.
Sleep Breeze Mode
will
automatically cycle from the selected
speed setting to Low until user turns
the unit OFF.
ENGLISH
Fig. 2
A
A. Power/Speed
Control
B. Timer Control
C. Oscillation Button
D. Natural Breeze and
Sleep Breeze Modes
E. Base Halves (2)
F. Thumb Screws (2)
G. Power Cord
H. Wiring Clip Slot
B
C
D
A
B
C
D
Fig. 5
E
F
Fig. 6
G
G
