4. How to take a contact SIAscan
Before conducting a scan clean the patient’s skin, removing cosmetics etc with a sterile swab. Check
for unusual conditions that may adversely affect the performance of the SIAscope V as described in
the
section.
1.
Cleaning the SIAscope V - Before each patient examination, wipe the end of the nose cone with
an Isopropyl wipe.
2.
Applying matching fluid - Apply optical matching fluid to the area of skin to be examined. A
single squirt from the applicator should be sufficient. Additional matching fluid is available from
Astron Clinica or your local distributor.
3.
Place the SIAscope V on the patient - Using the on-screen viewfinder centre the handset on
the lesion. Pressing down lightly to prevent light from the room contaminating the scan.
4.
Hold the SIAscope V still and press the button - Hold the handset still, then press and release
the handset button and wait while the SIAscope V takes its measurements. The software will in-
dicate when scanning is complete.
7
Summary of Contents for MoleMate
Page 1: ......
