Access
Control
Instruction
Manual
6
6.4 LockCtrl
Click “LockCtrl” in Settings menu, Enter the access control function.
6.4.1 Time Setting
"Time" refers to setting the time zone to allow open the door, It is an important part of access control
settings. And up to 255 “time” can be defined. it can be set to 6 time periods each "time", Each time
zone refers to the valid time period within 24 hours, 6 time zones are "or" relationship, As long as the
verification time can be meet one of them is valid. Each time zone format of "Time": hh:mm-hh:mm,
Accurate to the every minute follow the 24-hour clock.
if the end time is less than start time (23: 57- 23:56), The settings cannot be saved;
Enter the "Time Setting", the screen as follows:
Enter the "time1" settings, the screen as follows
：
For example: Allow the door to open at 04:00: -11:00,03:00-06:00,11:00-18:00
；
By analogy, you can define multiple time periods as needed.
Note: the system default “time1” open all day, The newly registered user default time period is
1, therefore, the newly registered users can verify success and open the door.
6.4.2 Users to open
“Users to open” confirm the number refers to the simultaneous needs of several users to confirm
before they can open the door, For example: set the “Users to open” to 2, Any two users can open
the door after verification is successful. The default is 1.
6.4.3 Unlock Time
“Unlock Time” refers to the device control to open or close the electric lock time, Set to "0"
，
turn off
the lock control function, The unit is 1 second, the maximum can be set as 255. Press "OK" to enter
settings, Press the number keys to enter the corresponding number, Press "OK" to exit and save the
settings. The default is 5.
