SUBMERSIBLE BATTERY INSTALLATION
QUICK START GUIDE
10
Step 10. Battery Pack Charging Procedures
Due to domestic and international Lithium-Ion battery shipping restrictions, limitations are placed
on battery cell capacity.
Each submersible battery pack requires a full charge cycle prior
to deployment.
Please observe the following submersible battery pack charging guidelines:
Charger Specifications:
•
Quick Charge Corporation
•
Model #QP1225 (USA), #QPXU1225 (EURO)
•
117V 60hz 3 amp
•
Programed for Biomark Lithium ION battery Packs
Charge Cycle Duration:
•
Average charge cycle varies depending on battery condition.
**
DO NOT
use Biomark provided battery charger on any other battery pack. **
DO NOT
use any
other battery charger to charge Submersible Battery Pack.
Connecting Charger to Submersible Battery Pack
•
Connect your Quick Charge ™ charger to AC power source (110/220 depending on
application) and ensure selector switch is in the “OFF” position.
•
Remove protective pipe plugs on positive and negative terminal posts of submersible
battery pack (show picture of pipe plugs on battery pack).
•
Connect positive (+) lead of charger output cable to the positive (+) terminal post of
submersible battery pack.
