pixl Real-Time PCR Platform
Instructions for Use Manual
Page 15 of 37
pixl Real-Time PCR Instructions for Use Manual
Rev. 01-28JUL2021
Auto Integration Time
This option allows the software to automatically choose the optical sensor integration time
(i.e. Exposure time of the fluorescence camera) according to the fluorescence strength of
the assay. This supports appropriate dynamic range of the sensors to yield the best signal to
noise ratio. It is recommended to keep this option checked (
Figure 7
).
Figure 8
. Screen shot of “REPORT” section used to save BioGX pixl thermocycling template.
Real-Time PCR Setup Page
Naming Experiment Run File
The setup of the experiment is initiated by clicking on the “Setup” button (
Figure 9
). The
experiment run file and unique samples are assigned. At this screen, the targets identified in
each of optical channels can be assigned. Note: If an experiment run file name is not
assigned, a default file name with date is generated.