7
EN
The other end of the CO2 Y-tube with the sinter plug that is
not attached to the regulator does not need to be closed off
or attached to anything. The resistance from the sinter plug
forces the entered CO2 through the easier path down the
CO2 tube towards the trap.
The following is a consumption table of CO2 comparing the
two CO2 flow rates:
Attaching the CO2 tube to the nozzle on the trap:
Insert the long end of the CO2 tube (opposite end of the
Y-connection with sinter plugs) into the designated opening
on the CO2 emitter nozzle on the Mosquitaire trap. [F10]
To remove the CO2 tube, press in the blue outlet nut to
release the tension and pull out the tube.
1. Open the valve on the CO2 gas cylinder by turning it counterclockwise until it is completely open.
2. Connect the power supply unit to the trap and plug it into a wall socket that is protected from rain and splash water.
The trap is now in operation.
ATTENTION: The Mosquitaire must be connected to the mains supply 24 hours a day; otherwise, the mosquitoes will be able
to escape from the trap.
Commencing operating of the trap
F10
Consumption Table of Carbon
Dioxide
CO2 Tube with Sinter Plug
CO2 Flow Rate in grams
/ hour
CO2 Flow Rate in grams
/ day
Number of days a 10kg CO2
cylinder lasts
Blue - Standard CO2 Flow Rate
8,3
200
50
Red - High CO2 Flow Rate
20,8
500
20
