________________________________________________________________
___
38
English
Issue 02 - 07/2001
ACCESSORIES
If an accessory is changed, press Function > Accessory to initialise the instrument in
order that the appropriate accessory can be identified. Depending on the accessory
type, a list of options is presented.
Multiple Cell Holder Accessories
•
Install by removing accessory in place, replacing with the new one, turning the
central mounting screw until it is finger tight and initialising as above.
•
All multiple cell holders have the option of being used as a single cell holder.
This means that there will be no rotation after pressing run.
Description
Part number
Comments
4 position cell changer
80-2106-01
Accommodates cells 10-50mmm in
pathlength
8 position water heated
cell changer
80-2109-70
Requires a water-circulating bath.
Locate round extension of tube
restrainer into top of cell changer
thumb screw. Attach the tube guide
to the instrument base using the
screws provided. Replace the front
blanking plug on the cell
compartment lid with the new one
that is provided.
6 position Peltier heated
cell changer
80-2106-04
Requires Temperature Control Unit
(80-2105-49). Insert into socket 3.
8 position cell changer
80-2108-01
Spare, if required
