GeneQuant
TM
1300 Quick Reference Guide Page 6
Version 2.0
Parameter
Folder
Sub-Folder
Manual
page
Description and options
Factor
Life Science OD600
25
Enter the factor. Range 0 – 9999. Only
available if units are cells/ml
Folder
Ulitilites
Folder Names
63
Select a folder to rename. Options:
Methods 1-9 or Favourites
G
Life Science Nucleic Acids - Oligo
17
Enter the proportion of Guanine bases.
Default is 10, range: 0 – 9999. Only an
option when units are pmol/
µ
l
Game
Utilities
Sudoku - Setup
64
Select the game number. Range 1-50. Only
available if ‘Computer’ (the 50 preset
games) is selected as the game mode
Games
Utilities
Preferences
63
Select whether the games function is on or
off. Options: yes or no
History
Utilities
Preferences
63
Select whether to use previously entered
parameters when the instrument is switched
on or to use default values. Options: On or
Off
Hour
Utilit
Date and Time
62
Enter the hour. Range 1-24
Interval
Applications Kinetics – Parameters 1
50
Enter the interval time in seconds between
measurements: 5, 10, 20, 29 or 60 seconds
Language
Utilities
Regional
62
Select the language used on the display
screen. Options: English , French, Italian,
Japanese or Spanish
Minimum peak
height
Applications Wavescan, options 4 –
peak detection
48
This selects the minimum height above the
highest of the two adjacent minima, that a
peak must be if it is to be detected
Minimum peak
width
Applications Wavescan, options 4 –
peak detection
48
This selects the minimum width, in nm, a
peak must be to be detected (width =
difference in wavelength between the
higher of the two adjacent minima and the
opposing intersection of that higher
minimum level and the peak profile). Range
1-190 nm, default 5 nm
Minutes
Utilities
Date and Time
62
Enter the minute. Seconds are zeroed when
OK is pressed
Mode
Applications Concentration
45
Select ‘Factor’ if the factor is known or
‘Standard’ if it will be calculated from a
standard of known concentration
Mode
Applications Kinetics – Parameters 2
50
Select the measurement mode: Delta A –
change in absorbance over the
measurement duration; Final A –
absorbance at the end of the measuremnt
duration; slope – rate of change of
absorbance over the measurement duration
Mode
Applications Single Wavelength
Wavescan
43
47
Select the mode of measurement –
Absorbance or % Transmission
Mode
Utilities
Sudoku - Setup
64
Select the mode – Computer, for 50 preset
games, or User to enter your own pattern
Month
Utilit
Date and
62
Select the month
Multiplier
Life Science OD600
25
Select the multiplier: 1000 or 1,000,000.
Only available if units are cells/ml
New Name
Utilities
Folder Names
63
Enter a new name for the folder
Number Format Utilities
Regional
62
Set the decimal point style: 999,9 or 999.9
Other MW
Life Science Tm Calculation
21
Only available if counter ion is ‘Other’
Time
ies
