7
Preset Program Operation Instructions
Starting a Program (Run On):
1. Press the power button to activate the oven - a red light will indicate that the oven is in the “on” position, and the
screen will display the actual temperature.
2. Press and hold the up and down arrow buttons until the screen displays "Level P".
3. Press the up arrow button and immediately release. The screen will display "Program 1".
4. Press and hold the asterisk button and use the up arrow buttons to select the desired program number
(Programs 2-5). Omit this step if desired program is currently displayed.
5. Press the up arrow button once and immediately release. The screen display will read Run Off.
6. Press and hold the asterisk button down, and then press the up arrow button. Immediately release. The screen display
will read Run On.
7. Press and hold the up and down arrow buttons until the screen displays the current temperature as well as the set
temperature. The program will start immediately; however, it may take several minutes to display.
8. At the start of a run the display will read "SPr" in green with the target temperature in red. When the set temperature is
reached the display will read "SoAK" in green, alternating with the actual temperature.
Stopping a Program (Run Off):
1. To stop a program, similar steps to starting a program are repeated.
2. Press the up and down arrow buttons and hold until the screen displays "Level P".
3. Press the up arrow button and immediately release. The screen will display Program (1-5).
4. Press the up arrow button once and immediately release. The screen display will read Run On.
5. Press and hold the asterisk button down, and then press the down arrow button and immediately release.
The screen display will read Run Off.
6. Press and hold the up and down arrow buttons and hold down until screen displays current and set temperatures.
The oven can now be powered off.
7. To turn the power to the oven off, press the red power button. The red indicator light will turn off.
Note:
It is important not to prematurely power down the Desert Chamber Pro before stopping a run that is in progress.
