background image

14

15

OPERATION

Please press the “off” or “low”button to reduce the seat 
temperature after using. Special precautions should be taken for 
children, those who cannot adjust the temperature, and those who 
have sensitive skin.

DO NOT ALLOW CHILDREN TO USE THE TURBO WASH  
or VORTEX WASH FUNCTION! SUPERVISION IS STRONGLY 
RECOMMENDED FOR THE ELDERLY OR OTHER PERSONS  
THAT MAY HAVE LIMITATIONS IN BODY MOVEMENT, ILLNESS  
OR DISABILITIES.

1. 

Check for Water Leaks

 

Please turn on the water supply valve and check connected  
spots (1~5) for the leakage.

2.  Preparation

 

Please plug the power cord into AC120V power outlet.

 

Plug the unit into the proper power source and the LED 
power light will start flashing.

 

Wait until the LED power light stops flashing  
and becomes solid red.

 

The water tank will be filled after pushing a “wash”  
(Posterior Wash, Feminine) button.

 

When the water tank is filling the buzzer “Beeps”continuously.

 

After the water tank is full the buzzer will end with  
“One Solid Beep”.

 

When you sit down on  
the seat, the ORANGE LED 
lamp on the control panel 
will light up.

 

When the digital sensor  
on the seat is activated, 
the operation LED window 
on the main unit will 
light “Occupied sensor” 
and simultaneously, the 
deodorizer fan will start  
to work. (BB-1700/ BB-2000 
Models)

 

Press this button to  
stop all operation.

3.  Sit On Seat

4.  Stop

Summary of Contents for BB-2000






















Reviews: