background image

4

5

IMPORTANT SAFEGUARDS

DANGER - To reduce the risk of electrocution

WARNING - To reduce the risk of burns, electrocution,  

fire, or injury to the persons

PLEASE OBSERVE THE FOLLOWING PRECAUTION  

BEFORE USING THIS PRODUCT

READ ALL INSTRUCTIONS BEFORE INSTALLATION AND USE

1.  Do not open the product to repair or remodel. Only qualified service 

personnel should service this product. Do not use attachments not 
recommended by the manufacturer.

2.  Connect this product to a cold water supply pipe carrying potable  

water. Do not connect to an industrial water supply line that does  
not carry water of drinking quality. This will negatively effect hygiene  
and performance.

3. 

Low Temperature Burns

 - A burn occurs when the skin has been exposed 

to high temperatures. However, a low temperature burn may occur when 
the skin has been in contact with an object at relatively low temperature 
(about 1040F). Close supervision is necessary when this product is used 
by children or adults with sensitive skin.

4.  If using any chemical toilet bowl cleaner, be sure to wipe up any spills 

that splash onto the electric bidet. Do not use benzene or any acid 
chemical detergent. Only neutral detergent permitted.

5.  Do not plug in the power cord before connecting the water supply hose.

6.  This product must be grounded. An approved Ground Fault Circuit 

Interrupt must be used.

7.  Do not splash water on this product. Please provide adequate ventilation 

to avoid high levels of humidity which can damage the electronic 
components. It is necessary to provide adequate ventilation with a fan, 
open door, or open window when bathing.

GENERAL CAUTIONS

1.  Never operate this product if it is not working properly, if it has been 

dropped or damaged, or dropped into water. Return the product to a 
service center for examination and repair.

2.  Do not stand or sit on the seat cover lid. It is not designed to  

support a user’s body weight.

3.  Allow the seat and lid to close automatically. Do not force the lid closed.

4.  Do not strain or push the connected hose and tube connecter; it may 

cause water leakage. Never drop or insert any object into any opening or 
hose. Use proper plumbing suppliesif any modification is to be made.

5.  Use this product only as described in the operating instructions.  

Never use while sleeping or drowsy. Do not use while bathing.

6.  Be careful so that this product does not become stained  

with excrement and urine.

7.  Drain the water from unit and unplug the power if this product is  

not going to be used for an extended period of time.

8.  Do not touch the power cord with wet hands. Do not reach  

for a product that has fallen into water. Unplug immediately!

9.  This product must be connected to a standard voltage power  

source. Do not connect power cord if the cord is damaged or broken.  
Do not plug the unit into a loose electric outlet.

10. Please disconnect the power cord when you clean this product or  

detach it from toilet bowl. Do not supply electrical power to the unit  
until the plumbing work has been completed. 

11.  Keep the electrical cord away from heated surfaces to prevent a  

fire hazard. Also, keep any flammable materials away from this product  
at all times.

Summary of Contents for BB-2000






















Reviews: