19
Press numeric key
to input interval, the data in the data sheet read according to the interval.
Press numeric key
to input the sample Abs. range, which is -4-4.
Press numeric key
to choose room, standard is manual, default is auto.
After finished, press
to enter spectrum interface.
Step 3, Calibrate 100%T/0Abs
Put the Reference Sample in the light path, press
to calibrate 100%T/0Abs.
Step 4, Measure the sample
Put the sample to be tested in the light path and press
to begin the test.
Step5, Data Process
After test, press
to enter data process interface. (Fig.4-13)
Fig. 4-13
Press
to recover original data.
Press
to change coordinate, test time and range.
Press
to enter data sheet, display test data A and dA/dt. Fig. 4-14
Press
,
to display the point value successively.
Fig. 4-14
