Biobase BK-AutoHS96, User Manual, Page: 29 / 55

28
3.5 System Management
1-1
Setting interface
：
System settings and user
management are performed on
this interface. This interface
requires administrator rights to
enter.
【
Setting
】 ：
Systemrelated
settings. Barcode file: Set the
folder path and file separator for
the barcode file output.
System alarm: Select the
sound file for the system
alarm tone.
Complete alarm: Select the
sound file for the experiment
completion sound.
Default QC Qty: Set the default
QC quantity. This quantity is the
sum of the number of standards
and QCs placed on the standard
seat. When it is set to empty, you
need to manually enter the QC
quantity for each experiment.
UV lamp life: Set the service life
of the currently used ultraviolet
lamp, which is convenient for
timely replacement of the expired
ultraviolet lamp.
Sound alarm: Enable the voice
prompt when the software pops
up the warning message.
Light alarm: When the software
pops up a warning message, the
light prompt is enabled.