Biobase BK-AutoHS96, User Manual, Page: 24 / 55

23
Table 2- 3 Consumables of Automatic Nucleic Acid Extraction System
（
BK-
AutoHS96
）
No. Name schematic diagram Function
8 8-tube
Store extraction products,
reaction solutions, etc.
2.4 Instrument installation
Make sure the instrument be installed by a qualified technician.
Make sure check out all parts of the model specified in the attached list are included in the
package after receiving the instrument,
The product installation instruction is shown in Figure 2-4 below.
1. air duct cover 2. screw hole of the foot cup
Figure 2 4 Automatic Nucleic Acid Extraction System (BK-AutoHS96) installation structure
diagram
1) Open the shipping outer packaging of the instrument;
2) Open the door of the bottom cabinet of the instrument, take out the accessory box, find the
screw cup tool and ratchet wrench from the accessory box, and screw the foot cup of the
instrument to the highest position at the screw hole of the foot cup, so that the instrument
can be moved by casters;
3) Place a piece of packing box with a sloping plate at one end of the instrument to be flat with
the base of the packing box, and push the instrument out of the package;
4) Unscrew the 4 screws of the air duct cover with an Allen wrench, remove the air duct