BIO RAD PowerPac Universal Power Supply, Instruction Manual

Page: 28 / 42

Page | 20
PowerPac Universal Power Supply Instruction Manual
3.4.3 Edit a Paused Run
This section describes how to edit a paused run.
Step Procedure Description
1. Pause the run. While a run is in progress (Run screen is displaying a run in
progress), press the PAUSE soft key or
. The PowerPac
displays a Run Paused screen.
2. Edit the method. The Run Paused screen displays the current run parameters,
as well as the date and time that the run was paused.
Press the EDIT soft key or
to begin editing the method.
3. Edit each step as
needed.
For each step you want to edit:
a. Press the up or down arrow key to select the step.
b. Press the EDIT soft key to view the step’s parameters.
c. Edit the step’s parameters according to the process in
Step 5 of Section 3.3.1 on page 15 .
d. If needed, add steps to the method according to the
process in Step 6 of Section 3.3.1 on page 16 .
When you are finished with edits, proceed to Step 4.
4. Resume the run.
Press to resume the run.
NOTE: Let the run finish before proceeding to Step 5.
5. Exit the Run Completed
screen.
After the run is complete, the Run Completed screen
appears.
Press the EXIT soft key to return to the Method List screen.