1.2.2 General Warnings
Warning: There are hazardous voltages inside the PharosFX scanner. Do not attempt to
defeat the door interlock or remove the instrument's cover. These are designed to prevent
user injury.
1.2.3 Power Safety Information
The PharosFX system is designed and certified to meet both I.E.C. 61010 safety standards
and Center for Devices, Radiological Health (CDRH) laser safety standards. Certified
products are safe to use when operated in accordance with the instruction manual. This
safety certification does not extend to uncertified equipment or accessories, even when
connected to the PharosFX system.
This instrument and its accessories should not be altered or modified in any way. Alteration
of the PharosFX or its accessories will void the manufacturer's warranty, void the I.E.C.
61010 and CDRH certification, and create a potential safety hazard for the user.
Bio-Rad Laboratories is not responsible for any injury or damage caused by the use of this
instrument for purposes other than for which it is intended or by modifications of the
instrument not performed by Bio-Rad or an authorized agent.
Figure 1.1 shows two serial number certification labels. These are found at the rear of the
PharosFX system and the rear of the External Laser. This label provides manufacturing
data about the instrument, its voltage settings and CDRH compliance information.
Fig. 1.1.a. Instrument serial number information on the rear of the PharosFX Scanner.
Note: For easy customer access, serial number information for the PharosFX scanner is
also located on the right hand side of the overlay located behind the scanner door.
2
