20
Section 5 Maintenance
The Model GS-800 Calibrated Imaging Densitometer requires easy periodic cleaning for
continued optimum performance.
Warning
:
To prevent personal injury, always turn the power switch off and unplug the
power cord from the wall outlet before performing any maintenance on the Model GS-
800 Imaging Densitometer.
Caution
:
Do not use ammonia-based cleaning products to clean the Model GS-800
Imaging Densitometer. Do not disassemble the Model GS-800 Calibrated Imaging
Densitometer or lubricate any parts.
5.1 Cleaning the Image Window Glass
To clean the glass:
1.
Turn off the power switch.
2.
Unplug the power cord from the wall outlet.
3.
Use a slightly damp cloth with a small amount of mild detergent or alcohol to wipe
the glass.
4.
Dry the glass with a clean, lint-free cloth.
Caution
:
To avoid breakage, do not rub heavily on the glass. Do not spray liquids
directly onto the image window. If spots remain on the glass, carefully use a razor
blade to remove them.
5.2 Cleaning the Cabinet Exterior
To clean the cabinet exterior:
1
Turn off the power switch.
2
Unplug the power cord from the wall outlet.
3
Use a slightly damp cloth to wipe the exterior.
4
Dry the cabinet with a clean, lint-free cloth.
Caution
:
If the cabinet is stained and a damp cloth does not remove the stain, a mild
detergent solution can be used.
