Step
(ml)
Number Start
Step
1.
0.0
Collect fractions of size 2.00 ml during entire run
2.
0.0
Turn chart recorder ON
3.
0.0
Isocratic Flow with 100% 25 mM tris, pH 8.1,
0% 25 mM tris, 0.5 M NaCl, pH 8.1 at 4.00 ml/min
for 1.0 ml
4.
1.0
Set UV baseline to 0.0
5.
1.0
Static loop: Inject 0.5 ml sample at 4.00 ml/min for
0.1 min
6.
1.5
Isocratic flow with 100% 25 mM tris, pH 8.1,
0% 25 mM tris, 0.5 M NaCl, pH 8.1 at 4.00 ml/min
for 0.8 ml
7.
2.3
Linear gradient with 0% to 50% 25 mM tris
0.5 M NaCl, pH 8.1 at 4.00 ml/min for 13.0 ml
8.
15.3
Isocratic flow with 0% 25 mM tris, pH 8.1,
100% 25 mM tris, 0.5 M NaCl, pH 8.1 at
4.00 ml/min for 2.8 ml
9.
18.1
Isocratic flow with 100% 25 mM tris, pH 8.1,
0% 25 mM tris, 0.5 M NaCl, pH 8.1 at 4.00 ml/min
for 8.0 ml
10.
26.1
End of protocol
3. When you have finished with the protocol editor, click on the toolbar
button
RUN
. You will see a dialog box asking you to name the run.
For now, type in Run 1 and click the
OK
button. You will now see the
Run Control Screen (see Figure 10).
28
4006147a.qxd 12/22/2000 1:29 PM Page 28
