In T&A status, place registered finger on sensor scanner. After a beep ‘di-’, system
will prompt as following,
FP Verify
Take off!
Remove your finger. If access granted, green LED indicator will be on with voice
prompt ‘Access granted’. And interface displays as following,
FP Verify
ID 008101
Verified
！
If access fails, red LED indicator will be on with voice prompt ‘Access denied’. And
interface displays as following,
FP Verify
Input Again
！
ID+ Password mode:
In T&A status, input staff ID through number keypad, i.e. 8108.
Pass Verify
ID 8108
Press [OK] key to confirm ID, and input password following prompt,
Input staff password and press [OK] key to confirm. If verification passes, green
LED indicator will be on with voice prompt ‘Access granted’. Else red LED indicator will
be on with voice prompt ‘Access denied’.
ID+FP mode
In T&A status, input staff ID, i.e. 8102
28
