Bio Compression Systems SC-3008, Operating Instructions Manual, Page: 4 / 16

CONTRAINDICATIONS

Infections in the limb, including cellulitis without appropriate antibiotic coverage

The presence of lymphangiosarcoma

Deep vein thrombosis

Inflammatory phlebitis or episodes of pulmonary embolism

Congestive heart failure
GENERAL EQUIPMENT SPECIFICATIONS
Model # SC-3008 - Sequential 8 Circulator
Segmented, Sequential Pneumatic Compression Device with Calibrated Gradient Pressures
DIMENSIONS: H X W X D (in inches)
5.5 x 12 x 8
WEIGHT: 8 lbs
INFLATION: 44 Seconds
DEFLATION: 5.5 Seconds
CYCLE TIME : 5.5 Seconds/Chamber
(“Electrical Specifications” under separate section)
PACKAGING, SHIPPING & STORAGE
The Model # SC-3008 is shipped in a specially designed (275 test) corrugated re-usable carton with protective
end-caps which envelope each end of the pump, thereby suspending the pump on all four sides within the
carton. This packaging design prevents damage to the pump (which would ordinarily be sustained) when the
carton is thrown or handled roughly by the carriers.
NOTE: The carton and end-caps should be saved for re-use each time the pump is either transported or
shipped. When transporting, for added convenience, the carton is equipped with a fold-up handle
assembly”
The device should be stored in a secure area, ideally 60 to 80 degrees (F), however, short term storage or
shipping with exposure to temperatures of –20°F to +110°F will not harm the unit. To maximize the unit’s
life, however, time should be allowed for temperature adjustment prior to use, when moving to areas of con-
trasting temperature. It is also advisable to avoid “extreme” heat ( +110°F) or cold (-20°F) when long term
storage is contemplated.
2