![background image](http://html1.mh-extra.com/html/bio-chef/atlas-pro/atlas-pro_user-manual-and-recipe-book_2753058009.webp)
9
Troubleshooting
My juicer
does not
operate when
the switch
is in the ON
position
1. Make sure the power cord is properly secured into
the power source and that the switch is turned to
the ‘ON’ position.
2. Check that the hopper is assembled correctly.
PLEASE NOTE
: If the hopper has not been securely
locked in place with the arrows aligning, the
appliance will not work for safety reasons. This
is due to a magnetic safety strip located inside
the hopper which must align with the matching
magnetic strip inside the base.
3. Check the appliance has been assembled
according to the instructions in this manual.
My juicer
has stopped
during
operation
1. Reverse / REV to unwind any fibre that is caught
around the auger.
2. If your juicer has stopped during operation, please
check that the hopper is correctly aligned with the
base. If the alignment shifts during operation the
juicer will stop.
3. Turn your juicer off, reset the hopper and you should
be able to continue.
PLEASE NOTE
: The BioChef Atlas Pro Whole Slow
Juicer has an automatic motor cut off safety feature
that will activate if the juicer is overloaded. This has
been designed to help prevent accidental damage
and to help extend the life of the machine.
4. To reset your juicer take off the hopper lid and
remove any ingredients in the juice bowl.
EN