PABX F
UNCTIONS
9
PABX Functions
You can connect two POTS
1
devices (e.g. analog tele-
phones, fax machines, modems, etc.) to Phone ports 1 and
2 of BinGO!.
Please note, however, that these devices must be config-
ured to use tone dialling, and not pulse selection.
If you just connect BinGO! to the ISDN and two analog
telephones to ports 1 and 2 you can use the following
functions without any further configuration.
• Free-of-charge internal calls between the two con-
nected devices—each device can be reached by di-
alling »
#
« on the other device.
• Both phones ring when an external phone call comes
in.
• You can call any external number by simply dialling
it. If your BinGO! is connected to the ISDN through
an external PBX, you may have to dial a prefix code,
often “0”, to access an external line.
Some PBXs and exchanges may, however, refuse to
forward calls without an ISDN calling party num-
ber. In these cases you will have to configure your
BinGO! as described in the following sections before
you can make external calls.
1.
»Plain old telephone service«
☞
!