• Connect the IP terminal Ethernet interface to a bintec H2 Auto Compact Ethernet switch port (LAN1 connector).
• Start a Telnet session from the IP terminal to IP address 192.168.1.1 ( bintec H2 Auto Compact default address).
• The default configuration does not ask for login credentials (user/password) to access the console.
For additional information on configuring your device, refer to the user manuals provided by bintec elmeg GmbH on
the documentation CD or website.
A.3 Connectors
A.3.1 POWER connector
MOLEX 2x2
PIN
SIGNAL
1
2
3
4
GND
VCC
IGNITION (Input)
DO (Output)
A.3.2 LAN Connector
RJ45 LAN
RJ45 PIN
FE Signals
GE Signals
1
2
3
4
5
6
7
8
BI-DA+
BI-DA-
BI-DB+
--
--
BI-DB-
--
--
BI-DA+
BI-DA-
BI-DB+
BI-DC+
BI-DC-
BI-DB-
BI-DD+
BI-DD-
A.3.3 WWAN Connector
The WWAN connector installed is an SMA female coaxial.
SMA Female
PIN
ANT
Internal
External
RF in/out
GND
Technical information
bintec elmeg GmbH
26
bintec H2 Auto Compact