Thank you for choosing a bintec elmeg product!
You will find the following parts in the
scope of delivery
:
be.IP swift
Document for quick start and Safety
Plug-in power supply unit
Wall mount
Stand
Ethernet cable (CAT5e)
DSL cable (TAE-RJ45)
If your delivery is not complete, please contact your retailer.
Your
be.IP swift
is delivered with the software available at the time of manufacture.
It is possible that a newer version of this software is already available. Therefore,
before you make the final configuration, check whether an update is available.
To do this, you can simply click on the
Search for Updates
tile on the
Home
page
of the user interface:
If your
be.IP swift
is not yet connected to the internet, you can also update using a
software image saved on your PC. You can find the corresponding downloads for
your device here:
Attention:
The device may only be operated in an
upright position with the enclosed accessories
(stand or wall bracket). Improper operation
can lead to damage and failure.
Please observe the safety instructions for
installation and operation of the unit.
https://tinyurl.com/mxpwcszk
You can then run the update from
the Home > Show
More > Firmware and Configuration
menu.
