Fielder in the Traceroute Test menu
Field
Description
Traceroute Mode
Select the IP version to be used for the Traceroute test.
Possible values:
•
•
Traceroute Address
Enter the IP address to be tested.
Pressing the Go button starts the Traceroute test. The Output field displays the traceroute
test messages.
18.3 Software &Configuration
You can use this menu to manage the software version of your device, your configuration
files and the language of the GUI.
18.3.1 Options
Your device contains the version of the system software available at the time of production.
More recent versions may have since been released. You may therefore need to carry out
a software update.
Every new system software includes new features, better performance and any necessary
bugfixes from the previous version. You can find the current system software at
. The current documentation is also available here.
Important
If you want to update your software, make sure you consider the corresponding re-
lease notes. These describe the changes implemented in the new system software.
The result of an interrupted update (e.g. power failure during the update) could be that
your gateway no longer boots. Do not turn your device off during the update.
An update of BOOTmonitor and/or Logic is recommended in a few cases. In this case,
the release notes refer expressly to this fact. Only update BOOTmonitor or Logic if
bintec elmeg GmbH explicitly recommends this.
bintec elmeg GmbH
18 Maintenance
be.IP 4isdn
397
