13.2.1 Profiles
A list of all ATM profiles is displayed in the WAN->ATM->Profiles menu.
If the connection for your Internet access is set up using the internal modem, the ATM con-
nection parameters must be set for this. An ATM profile combines a set of parameters for a
specific provider.
Note
The ATM encapsulations are described in RFCs 1483 and 2684. You will find the
RFCs on the relevant pages of the IETF (
).
13.2.1.1 New
Choose the New button to set up new ATM profiles.
The menu WAN->ATM->Profiles->New consists of the following fields:
Fields in the ATM Profiles Parameter menu.
Field
Description
Provider
Select one of the preconfigured ATM profiles for your provider
from the list or manually define the profile using
/
1
.
Description
Only for Provider =
/1
Enter the desired description for the connection.
ATM Interface
Only if several ATM interfaces are available, e.g. if several inter-
faces are separately configured in devices with SHDSL.
Select the ATM interface that you wish to use for the connec-
tion.
Type
Only for Provider =
/1
Select the protocol for the ATM connection.
Possible values:
•
! ,).
(default value): Ethernet over ATM
bintec elmeg GmbH
13 WAN
be.IP 4isdn
223
