WR-90 Point to Multi-Point Wireless Instruction Manual
24
Relays Module
Each
Relays
module has two channels. Each channel may be independently programmed and mapped to
remote digital I/O or Modbus registers. Once you have modified the module’s settings, click the
Save
Module Configuration
button to save these settings to the base station.
If you have made changes to the module that have not been saved and would like to load the saved
settings from the base station, click the
Read Settings from Hardware
button. If you would like to reset the
selected module to its default settings, click the
Load Default Settings
button.
The Monitoring area at the bottom may be used to view the current relay state or manually test relay
operation.
Note:
For information about
Modbus Access
, please see
Modbus Register Address vs Modbus Register
Number
on page 28.
