WR-90 Point to Multi-Point Wireless Instruction Manual
19
Connecting Field Units to Base Station
The first thing that must be done when programming the WR-90 is connect all of the wireless field units to
the base station. Configuration of the base station is accomplished using the
WR Manager
software,
while the individual field units may be programmed using the device buttons which are accessed by
unscrewing the enclosure cover. See Programming the Field Units on page 30 for details on field unit
programming.
After the base station has been connected to WR Manager (see page 18), field units can be connected to
it from the
Remote Unit Configuration
tab. Select each unit from the
Unassociated Remote Units
list and
click the
Add to Client List
button.
Field units must have the same network ID and encryption settings as the base station in order to
connect. Each field unit must be programmed to have its own unique Modbus address.
Note:
All units must be powered on in order to connect them to the base station.
