925-0367 Rev A
1018
9
CONTROLS
The unit has no user controls. Factory supplied configuration may be changed using SPL-100
configuration software as described in
Configuration
below.
CONFIGURATION AND ADJUSTMENTS
Before installation, users may wish to change the factory confirmation.
User Configuration
The following configurations may be set by users:
•
Measurement times and frequency
•
Power consumption reporting to help predict when the battery must be replaced.
•
Transmission frequency
The unit may be configured using the supplied configuration software via the MicroUSB
connector located under the Battery Cap or over LoRa.
The LoRa configuration method is intended primarily to allow units installed in field
applications to be reconfigured. New configurations will only be received and applied when
the unit wakes at its previously configured wake time.
Factory Configuration Settings
Measurement time: 8AM US EST
Measurement frequency: 24 hours
Power consumption reporting: On
ASSEMBLY
The unit is supplied fully assembled and requires no user assembly other than attachment of
antenna and insertion of battery.
