925-0367 Rev A
1018
4
Label 2: Warning Logotype
The Warning Logotype label is located on the product body side.
Label 3: Aperture Label
The Aperture label is located on the product front adjacent to the aperture.
Label 4: Brand Label
The Brand label is located on the product body side.
FCC INFORMATION
NOTE: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
INTENDED USE
The SPL-100 is intended for mounting in fixed, known locations and for use in measuring
distances to solid materials in low and no-dust environments.
