925-0367 Rev A
1018
11
MAINTENANCE
The unit may require periodic servicing for the following reasons:
1. Battery replacement
2. Reconfiguration
3. Cleaning
The unit does not require maintenance or servicing to remain in compliance with CFR Title 21
1040.10.
Service Warnings
Disconnect the battery before servicing the unit.
If it is impossible to disconnect the battery prior to servicing, take precautions to prevent the
laser aperture located on the shutter from being pointed at eyes.
Do not tamper with or remove the electronics cover.
Do not tamper with or remove the shutter or shutter attachment means.
Battery Replacement
For battery replacement, remove the battery cap. Open the battery cover. Remove the
battery and replace with a new battery. Close the battery cover and replace the battery cap.
Batteries can be purchased from BinMaster. Contact your RSM for pricing and availability.
Reconfiguration
Reconfiguration of the unit may be accomplished over LoRa or using the MicroUSB
connector located under the MicroUSB cover on the back end of the unit.
Cleaning
The exterior of the unit may require periodic cleaning. Simply wipe the unit with a soft damp
cloth. Mild detergent may be used as required.
