DPM-100 Digital Panel Meter Modbus
®
Display
Instruction Manual
2
Disclaimer
The information contained in this document is
subject to change without notice. BinMaster
makes no representations or warranties with
respect to the contents hereof and specifically
disclaims any implied warranties of
merchantability or fitness for a particular purpose.
See Warranty Information and Terms &
Conditions on
details.
•
Read complete instructions prior to installation
and operation of the scanner.
•
Risk of electric shock or personal injury.
•
This product is not recommended for life support
applications or applications where malfunctioning
could result in personal injury or property loss.
Anyone using this product for such applications
does so at his/her own risk. BinMaster shall not
be held liable for damages resulting from such
improper use.
WARNING
Cancer and Reproductive Harm -
Limited Warranty
BinMaster warrants this product against defects
in material or workmanship for the specified
period under “Specifications” from the date of
shipment from the factory. BinMaster’s liability
under this limited warranty shall not exceed the
purchase value, repair, or replacement of the
defective unit. See Warranty Information and
Terms & Conditions on
complete details.
Registered Trademarks
All trademarks mentioned in this document are
the property of their respective owners.
© 2021 BinMaster. All rights reserved.
FREE ScanView
Programming Software
The scanner can be powered from the Micro USB connection.
When using the Micro USB connection,
DO NOT
apply AC or DC
power to the scanner.
The easiest and quickest way to program your DPM-
100 Modbus display is to use the FREE ScanView
programming software. This software is loaded into
the scanner and connects and installs directly to your
PC with a USB cable. We recommend that the first
thing you do after taking the Modbus scanner out of
the box is connect it to your PC with the provided
USB cable – do not use a different cable.
DO NOT
apply AC or DC power to the scanner while your PC
is connected to the scanner as it will disrupt the USB
connection.
ScanView programming software is intuitive, and
most customers can get their scanner programmed as
they like without even looking in the manual.
In addition to programming, the software may be used
for:
•
Monitoring
•
Datalogging using your PC
•
Generating and saving programming files for
later use
Once your DPM-100 is programmed the way you want it,
you can wire it up for your application per the instructions
in this manual and install it. If you find that you need to
make adjustments to the programming after the scanner is
installed, you can use the front panel buttons and the
instructions in this manual to do so.
