background image

77-2475-R5.2  (9/2017)

9 / 12

EN

www.carlisleft.com

BINKS MODEL 207-12393  

CHOPPER AIR MOTOR ASSEMBLY

 1 

 

  

SEAL .............................................. 1

 2 

  

BEARING ....................................... 2

  3   

 

DOWEL PIN ................................... –

  4   

 

DRIVE END PLATE ......................... –

 5 

  

SHIMS ............................................ 2

  6  

 

BODY ............................................ –

  7   

 

CAM RING ..................................... –

  8   

 

ROTOR ASSEMBLY ........................ –

 9 

  

VANE ............................................. 8

  10  

 

DEAD END PLATE ......................... –

 11 

   

END CAP GASKET ......................... 1

  12  

 

DEAD END CAP ............................ –

  13  

207-10062  TIRE SHAFT ................................... 1

  14  

237-14 

ROLL PIN ....................................... 2

  15  

237-22-K5  E-CLIP ............................................ 2

 Items available in Repair Kit 106-1265. Please order separately.

 Items with no quantity are not available for purchase.

 ITEM 

PART 

 NO. 

NO. 

DESCRIPTION 

QTY.

PARTS LIST

 

When ordering, please specify Part No.

CA PROP

65

PROP 65 WARNING

WARNING: This product 

contains chemicals known to 

the State of California to cause 

cancer and birth defects or 

other reproductive harm.

Summary of Contents for 201-510













Reviews: