183GZ-5200
2 GALLON HOSE/GUN CLEANER
!
WARNING
High pressure can cause serious injury.
Follow the pressure-relief procedure on page 3 before
opening the lid or performing maintenance on the tank.
DESCRIPTION
Binks Hose/Gun Cleaner provides a means of cleaning
the inside of material hose, fluid passageways of
spray guns, and other paint equipment. It is
designed to mix solvents and compressed air to
pressure flush paint lines and passages quickly and
thoroughly, eliminating color contamination and
saving time. This results in clean and dry paint
passageways using less than 25% of cleaning
solvents required in wet flush systems.
Important: Read and follow all instructions and SAFETY PRECAUTIONS
before using this equipment. Retain for future reference.
Material Hose
Main Air
Line
Material
Hose
Hose/Gun
Cleaner
Fluid
Outlet
Regulate
to 110 psi
max.
Material
Tank
Main Air
Hose
Filter
Regulator
Assembly
Typical Installation
WETTED PARTS
Galvanized steel, aluminum, nickel plated brass,
PTFE, Santoprene
®
, Sarlink
®
, and polyethylene.
!
WARNING
Static electricity produced when using this Hose/Gun Cleaner can
cause serious injury.
To prevent sparks from static electricity, you must ground:
1. The Hose/Gun Cleaner
2. The gun or tool attached to the fluid hose
3. The equipment to be cleaned
To Ground equipment:
1. Use air hose containing static electricity grounding wire.
2. Attach one end of a ground wire to each item listed above.
3. Attach the other end of the wire to a water pipe, metal
electrical conduit, or any pipe or structural member known to
be grounded.
SPECIFICATIONS
Maximum Working
Pressure
110 psi
Capacity
Up to 2.8 Gallons
Tank Shell
SA-414 Steel, Galvanized (Zinc)
Tank Lid
SA-414 Steel, Galvanized (Zinc)
Fluid Tube
3/8 in. Steel Pipe, Galvanized
Fluid Outlet
3/8 NPS(M) (Plated Brass)
Air Inlet
1/4 NPS(M)
Hose Cleaner Hub
Aluminum
Plugs
Steel, Zinc Plate
Clean equipment extremely efficiently with less solvent
77-2933-R1.0 (6/2017)
1 / 6
www.carlisleft.com
EN
SERVICE MANUAL
