Binatone SI-2550, Instruction Manual

Page: 4 / 38

4 44 44
Steam Iron SI-2550
Please read the safety instructions carefully before using this
appliance. Please retain the instructions for future reference.
DESCRIPTION OF
COMPONENTS
1. Casing
2. Handle
3. Water inlet opening
4. Water tank cover
5. Water tank with maximum limit mark
6. Spray nozzle
7. Spray button
8. Burst of steam button (turbo steam, burst of steam in a vertical
position)
9. Steam control knob
10.Temperature control knob
11.Operation indicator
12.Iron sole plate
13.Power plug
14.Power cord
15.Measuring jug
BEFORE USE
!
Remove all packaging from the appliance.
!
Turn the steam control knob
(9) (9)
(9) (9) (9) and the tem-
perature control knob into the «0» position.
! If you intend to iron with spray or steam, push
the cover (4) (4) (4) (4) (4) up and fill the tank (5) (5) (5) (5) (5) with
water through the opening (3) (3) (3) (3) (3) . Use the mea-
suring jug (15) (15) (15) (15) (15) for convenience and ease.
Note:
If your area has hard water, we recommend you use
filtered or bottled water.
Attention: Always disconnect the iron from the electricity
mains supply prior to filling the tank (5) . Do not
overfill the tank (see the «Max» mark on the tank
(5) . Do not fill the tank (5) with other liquids.
!
Prior to first use iron a clean old piece of cotton cloth to make sure
the sole plate and the water tank are absolutely clean (see
subsection «Steam ironing»).
Note: Light smoke may emit during the first use of the
appliance: it is a normal occurrence that will soon
disappear.