Binatone JE-8100, Instruction Manual

Page: 5 / 28

5
ENGLISH
SPECIAL SAFETY MEASURES
Your juicer is not meant for the processing of
fruit and vegetables with small stones (e.g. sea-
buckthorn, black-currant, tomatoes etc.). Before
preparing food always remove stones and other
tough tissues.
Before switching the juicer on always check if
the lid is properly installed and fixed.
Do not open the lid latches or remove the lid when the juicer is
on. Switch off the appliance wait for the motor to stop and then
open the appliance.
Your juicer is equipped with an automatic protection system;
which stops the operation if the juicer parts are not assembled
properly.
To push the fruit and vegetables inside use only the pusher
that comes with the juicer. Do not use foreign objects, and
never use your fingers for that.
Do not overload the juicer; do not use excess force to get the
fruit through.
Do not let foreign objects get into the fruit inlet.
Only run the juicer for 5 minutes at a time, leave the appliance
for a 10 minute break before using again.
If your juicer becomes blocked, switch it off, unplug and re-
move pulp of fruit and vegetables.
Always unplug after use and before disassembling and clean-
ing.
Do not use the juicer if the grater-filter or its housing is dam-
aged.
If the juice stops coming out of the nozzle, it means that the
juicer is blocked. Stop loading or you may damage the motor.
Then switch the juicer off, unplug and clean as described in the
cleaning instruction below; after that you may resume the
juice preparation. Please note; processing soft vegetables and
fruit means you will need to clean the juicer more often.
PARTS OF THE APPLIANCE
Figure A:
1. Pusher
2. Feeder tube
3. Lid
4. Grater/filter
5. Separating unit
6. Separating unit spout
7. Motor unit
8. Safety lock button
9. Safety lock
10.Body
11.Three-position switch «0/1/2»
12.Pulp container
13.Juice cup with foam separator