42
Binatone Help: www.meetthebrick.com
REGISTRATION
3 Scroll
D
to
ECO Mode
and press
Select
.
4 Press
U
or
D
to
ECO PLUS
, press
Select
.
5 Press
U
or
D
to highlight
Off
or
On
then press
Select
.
6 Press
E
to return to standby.
NOTES
When ECO is set to on, the
icon is replaced with
icon.
The base transmission power will be reduced.
When ECO PLUS is set to
On
will be displayed.
12 REGISTRATION
Up to 11 handsets can be registered to one base station.
Additional handsets must be registered to the base before you
can use them.
• The instructions described below apply specifically to
the handset of this model If you wish to register another
manufacturer’s handset, the instructions may vary. In this case,
please refer to the instruction manual of the additional handset.
• The System PIN is required to register or de-register handsets.
The default PIN is 0000.
12.1 To register a handset
On the base:
1 Press and hold
PAGE
until the base emits a double beep. The
base will remain in registration mode for 90 seconds.
On the handset:
1 If the handset is new, the display shows
Please register
. Press
Reg
.
2 Display shows
Press and Hold Base Find Key
.
3 Press
OK
, display shows
Searching Base X
. If the system PIN is
0000 (default) the handset will automatically register, if the PIN
has been changed enter the system PIN and press
OK
.