25
MoIP Audio Receivers
1.
The
Maximum Output Level
of the MoIP Audio receiver is adjustable to either 1 Volt or
2 Volts RMS. The proper setting is dependent on the amplifier or switcher/preamplifier
that the receiver is connected to and the maximum voltage level that the line level input is
capable of. Default value is 2 Vrms.
2.
The
Output Volume
of the MoIP Audio receiver is adjustable for use with an amplifier
without an adjustable volume level. For use with an audio system with its own volume
control, it is recommended to leave this setting at the default value, 100%.
3.
Audio Latency
– The MoIP Audio receiver provides for up to 250 milliseconds of audio
delay adjustment. If the audio signal from the source needs to be delayed in a specific
location, it is best to make the adjustment here, on the receiver. The MoIP Audio transmitter
also contains delay capabilities to adjust the delay for a specific source globally. The default
value is 0.
21
Screenshot of B-900-MOIP-4K-RX
Screenshot of B-900-MOIP-4K-RX-2AC
