16
3. Verify Jumbo Frame
Choose
SETTINGS > PORTS
, then verify
Jumbo Frame
is set to greater than 8,000 Bytes. The
default value is 9216 the maximum is acceptable.
4. Set up the MoIP Controller
Connect the controller to the MoIP Switch and use the external power supply to connect it to
an AC outlet. Then, claim the
MoIP controller
on OvrC and access the local UI.
IMPORTANT:
This is
REQUIRED
for firmware maintenance.
1. Document the MoIP Controller MAC Address and Service Tag on the box or on the bottom
of the device
2. Log into OvrC and go to
Customer
>
Devices
, click
+ Device
.
3. Manually enter MAC Address and Service Tag to claim the device.
