Binary B-520-EXT-230-RS-W Installation Manual Download Page 2

2

IMPORTANT SAFETY INSTRUCTIONS 

To reduce the risk of fire or electric shock, read and follow all instructions and warnings in this 
manual. Keep this manual for future reference.

1.  Do not expose this apparatus to rain or moisture. Do not expose this equipment to dripping 

or splashing, and ensure that no objects filled with liquids, such as vases, are placed on the 
equipment. Do not use this apparatus near water.

2.  Do not remove cover. No user serviceable parts inside. 

3.  Clean only with a dry cloth.

4.  Do not block any ventilation openings. Install according to manufacturer’s instructions.

5.  Do not install near any heat sources such as radiators, heat registers, stoves or other 

apparatus (including amplifiers) that produce heat.

6.  Do not override the safety purpose of the polarized or grounding plug. A polarized plug has 

two blades, one of which is wider than the other. A grounding plug has two matching blades 
and a third grounding prong. The wide blade or the third prong is provided for your safety. If 
the provided plug does not fit into your outlet, consult an electrician for replacement of the 
obsolete outlet.

7.  Protect the power cord from being walked on or pinched, particularly at the plug end and 

where the power cord is attached to the apparatus.

8.  Only use attachments and accessories specified by the manufacturer.

9.  Refer all servicing to qualified service personnel. Servicing is required when the apparatus 

has been damaged in any way, such as when the power supply cord or plug is damaged, 
liquid has been spilled on or objects have fallen into the apparatus, the apparatus has 
been exposed to rain or moisture, the apparatus does not operate normally, or it has been 
dropped.

10. To completely disconnect this equipment from power, disconnect the power supply cord 

from the power outlet.

The lightning flash with arrowhead symbol, within 
an equilateral triangle, is intended to alert the user 
to the presence of suninsulated dangerous voltage 
within the product’s enclosure that may be of 
sufficient magnitude to constitute a risk of electric 
shock to persons.
The exclamation point within an equilateral 
triangle is intended to alert the user to the 
presence of important operating and maintenance 
(servicing) instructions in the literature 
accompanying the appliance.

CAUTION

CAUTION: TO REDUCE THE RISK OF 

ELECTRICAL SHOCK.

DO NOT REMOVE COVER. NO USER 

SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED 
SERVICE PERSONNEL.

Summary of Contents for B-520-EXT-230-RS-W

















Reviews: