13
6.4. HDMI Out (Transmitter)
We recommend using an HDMI cable that is 1 meter or less to ensure the highest signal quality.
This HDMI Out is used to connect to local TV/displays.
6.5. EDID Configuration
There are two EDID operating modes available for HDMI loopout. The EDID setting
determines if the source connected to the HDMI input chooses the EDID from the display
connected to the HDMI out on the transmitter and/or the display connected to the HDMI out
on the receiver
6.5.1. Auto EDID
When the EDID DIP switch is set to AUTO, the lowest common EDID setting between the
display connected to the transmitter and the display connected to the receiver will be applied
to both displays.
1
2 3
4
ON
FIGURE 12: Auto EDID Mode
6.5.2. HDBT EDID
When the EDID DIP switch is set to HDBT, the EDID from the display connected to the
HDBaseT receiver will be applied to both displays.
1
2 3
4
ON
FIGURE 13: HDBT EDID Mode
Transmitter
Transmitter