pg.14
B-320-1CAT-HDIR-W
Installation and Users Manual
6.3. EDID Configuration
6.3.1. EDID Mode Settings
6.3.2. Learning EDIDs
1. Set the EDID Mode dial to “7”.
2. Connect the HDMI display to “HDMI IN” on the Transmitter with a HDMI cable.
3. Set “MODE” on the transmitting unit to “7”.
4. Power on the Transmitter by connecting the 5V Power Supply.
5. The LED on the RJ45 of the transmitter will flash On and Off once to learn the EDID. Keep the
mode dial on “7” at all times to use the learned EDID.
6. Unplug the HDMI cable from the display and follow the installation instructions in section 6.1
B-320-1CAT-HDIR-W Transmitter Installation.
6.4. Distance Calibration
CAUTION: Inappropriate signal level setting may cause an overpowering issue that may shorten the
product life. Follow the steps below to adjust the distance setting in order to avoid overdriving.
1. Set the distance control to 7 (Weakest).
2. Select a source that is outputting the highest-quality video that will be transmitted to the receiver.
A. If you see flickering or blinking images on the display:
A.1 - Adjust the signal level from 7 to 0 one step at a time, and stop turning the rotary switch
when the audio/ video is playing normally.
EDID Setting Supported Resolutions Color Depth
Audio Channels
0
1080p @60Hz
24-Bit
7.1 ch
1
1080p @60Hz
24-Bit
2 ch
2
1080p @60Hz
36-Bit
7.1 ch
3
1080p @60Hz
1080p @30Hz
24-Bit 3D
7.1 ch
4
1080i @60Hz,
720p @60Hz
24-Bit
7.1 ch
5
1080p @30Hz
1080i @60Hz
720p @60Hz
24-Bit
2 ch
6
1080p @60Hz
24-Bit 3D
2 ch
7
Learning Mode
—
—
Technical
Transmitter
Receiver
HDMI Compliance
HDMI 3D
HDCP Compliance
Yes
Video Bandwidth
6.75Gbps
Video Support
480i / 480p / 720p / 1080i / 1080p60
HDMI over UTP Transmission
Resolution
Cat5e
Cat6
1080i / 720p 24-bit color
200ft
200ft
Full HD 1080P 24-bit color
130ft
165ft
Full HD 1080P 36-bit deep color
65ft
65ft
Signal Equalization
8-level digital control at RX
Input TMDS Signal
1.2 Volts (peak-to-peak)
Input DDC Signal
5 Volts (peak-to-peak, TTL)
ESD Protection
(1) Human body model — ±15kV (air-gap discharge)
& ±8kV (contact discharge) (2) Core chipset — ±8kV
IR Signal (Bi-directional)
Carrier frequency: 20-60kHz
Connections
HD Link
1x RJ45
1x RJ45
HDMI
1x HDMI Type A
(19-pin female)
1x HDMI Type A
(19-pin female)
IR Receiver (In)
---
1x 3.5mm Stereo
IR Control In
1x 3.5mmMono
---
IR Flasher (Out)
1x 3.5mmMono
1x 3.5mmMono
Power
Latch-Locking
Latch-L 2 Conductor
Controls
Rotary Control Switch
EDID Mode
Distance Signal level
Mechanical
Housing
Metal enclosure
Dimensions
2.9” x 3.5” x 1”
4.14“x 1.75” x 2.36”
Weight
1.1 lbs
Power Supply
5V DC 2A
Power Consumption
3 Watt (max)
Operation Temperature
32~104°F
Storage Temperature
-4~140°F
Relative Humidity
20~90% RH (no condensation)
CAUTION
CAUTION: TO REDUCE THE RISK OF
ELECTRICAL SHOCK.
DO NOT REMOVE COVER. NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.