© 2012 Binary
B-320-1CAT-HDIR-W
Installation and Users Manual
pg.11
5.2.1. IR Receiver In (3.5mm {1/8”} Stereo) Connections
When connecting a control system or connecting block to the IR Receiver In on the Receiver, the
9V DC (Sleeve) must not be connected. Connections of this type require the use of the included
Stereo to Mono IR Adaptor or a custom cable. A mono 3.5mm cable should not be used as it will
short out the 9 VDC to GND and will make the connection inoperable.
5.2.2. IR Control In and IR Flasher Out (3.5mm {1/8”} Mono) Connections
5.3. HDMI Out to Display (HDMI)
Recommended Cabling
• 1 meter or shorter HDMI Cable
IR Signal (Tip)
GND (Ring)
9V DC (Sleeve)
IR Signal
Tip
GND (Ground)
Ring
+9V DC
Sleeve
IR Signal (Tip)
GND (Sleeve)
IR Signal
Tip
GND (Ground)
Ring
+9V DC
Sleeve
IR Signal (Tip)
GND (Ring)
9V DC (Sleeve)
IR Signal (Tip)
GND (Sleeve)
To B-320-1CAT-HDIR-W
Receiver
To IR Control System
or Connecting Block
(B-320-1CAT-HDIR-W Receiver Only)