pg.12
B-320-1CAT-HDIR-W
Installation and Users Manual
5.4. Optional Remote Power (2 Conductor) Connections
Power for the B-320-1CAT-HDIR-W receiver can be supplied via a remote power source when use
of the Latch-Locking Power Jack is not desired. The connection is a 2 conductor removable plug
located on the rear of the B-320-1CAT-HDIR-W receiver.
Recommended Cabling
• One 18 gauge per leg or Two 22/ 24 gauge per leg
Connection Precautions!
• Observe the connections polarity markings.
Reversing the polarity may cause damage to the product.
• DO NOT
use this connection and the Latch-Locking Power Jack Connection simultaneously. Doing so
may cause damage to the product.
Connection Details:
Connecting a Remote Power Supply
The included WPS-ACC-PWR DC Power Plug can be used to convert the single plug of a power
supply to 2 wires. This eliminates the need to cut the wires on the end of the power supply.
+5V DC 2A
- (GND)
(B-320-1CAT-HDIR-W Receiver Only)