GAT Handheld Coder GAT Pro+ User Manual
©2016 Bimmer Retrofit Inc.
Each certificate for FSC can be individually selected, read and written. Usually FSC
certificates are imported by the manufacturer and no further changes of these
certificates are required.
eFSC tab
allows quick and direct FSC code importation without intermediate verification
procedure. This procedure is normally used when all FSC codes of head unit need to be
replaced by another set of FSC codes. FSC VIN of head unit will be automatically
changed to match the VIN of the newly-loaded FSC set.
After pressing ‘Import’ button, a pop-up screen will appear on the display where you
will be able to select an FSC code file from the internal GAT storage for importation.
As soon as selection is confirmed, GAT Coder will automatically import and verify the
FSC code. Result will be shown on Information Display. This procedure should be
repeated for each of FSC code in new set.
In case when certificate for a selected FSC code should also be replaced, the ‘Certificate’
checkbox should be checked before the ‘Import’ button is pressed.
Primary advantage of
eFSC
tab over
FSC
tab is simplicity of FSC code importation
procedure, which does not require any intermediate FSC code verification. Also the VIN
number for the FSC code is changed in the head unit automatically. Procedure is very
simple and can be described as: ‘select from local storage -> directly load to head unit’.
