BIMG METVISA TFG.6, Instruction Manual, Page: 9 / 20

9
3.2 LPG Gas Installation - Recommendations and Care
Check that the place where the equipment will be installed is ventilated and in accordance
with the Rules for the Prevention of Risks at Work and Safety at Work on Machines and Equipment
(Regulatory Norm NR-12), and periodic inspections by a technician are recommended to ensure that
its components are in working condition.
ATTENTION!
The disposition of the equipment must be in an airy place, however that does not have
airflow, thus avoiding the extinguishing of the flames in the burners, causing gas leakage.
The gas installation must be done by a qualified technician for this function and observing
the safety rules.
The equipment must be installed with the following recommendations and items described
below, HOWEVER NOT PROVIDED WITH THE EQUIPMENT:
•
Gas cylinder - for this equipment the minimum mass is 13 kg (code P13) of LPG (liquefied
petroleum gas). The cylinder must comply with ABNT 8460. Check the product's warranty seal. If it
has violated, do not install.
•
Pressure Regulator or Gas Record - use only a low pressure regulator (2.8Kpa) and certified,
embossed inscription NBR 8473. When installing the regulator, turn the regulator to the right, until it
is firm. Never use tools to perform this operation.
•
Hose - the model with INMETRO certification has the engraving NBR 8613, manufactured in
transparent PVC plastic with a yellow stripe. IMG fryers are manufactured with a 3/8
” hose
connection. The hose must not pass through or be embedded in walls, and must not make any kind
of seam (welding or gluing). Fix the ends only with suitable clamps. Never use wires or tapes.
Always check the expiration date of the hose.
IMPORTANT
In addition to the instructions in this manual, it is recommended to also follow the
instructions of the manufacturers of cylinders, pressure regulators (gas register) and gas
hoses, as these items do not accompany the equipment.