Problem:
The motor does not move when a step signal is sent to the
drive.
Solution:
If the enable input is on (low with respect to a 5-24 volt signal),
it will disable the motor. Do not connect anything to the enable input if
there is no reason to disable the motor.
Problem:
The motor will not run slow enough with a potentiometer con
-
nected to my drive (it has an internal oscillator).
Solution:
Some drives’ internal potentiometers cannot be adjusted to
zero speed. Check the specifications in the manual that came with the
drive.
Problem:
At startup, the motor does not run although the wiring is cor
-
rect.
Solution:
Make sure that dip switches and jumpers are set properly.
Read your driver manual carefully.
Problem:
System not working properly.
Solution:
Troubleshoot by replacing the drive and see if the problem
persists. Please read your drive manual before and during your setup.
Bimba manuals, concise and comprehensive, are available for download
at our website,
www.bimba.com
.
18
